Published By: MacroAir
Published Date: Apr 26, 2018
HVAC concerns in an industrial facility like a warehouse or manufacturing plant can be complicated. Not only are these spaces usually larger than traditional commercial areas, but they often have equipment or products that need to maintain a specific temperature. MacroAir’s large industrial ceiling fans provide optimal airflow for industrial facilities and are an affordable alternative to HVAC systems.
MacroAir’s big industrial fans deliver a cooling effect for occupants, help control the effects of humidity, and can also help conserve heat in colder months by pushing warm air that is trapped at the ceiling toward the walls and down to the floor at occupant level.
MacroAir’s big ceiling fans provide an efficient airflow solution and a sustainable alternative to relying on HVAC alone to cool large spaces.
NSS Labs performed an independent test of the Cisco AMP for Endpoints v6.0.5. The product was subjected to
thorough testing at the NSS facility in Austin, Texas, based on the Advanced Endpoint Protection (AEP) Test
Methodology v2.0, which is available at www.nsslabs.com. This test was conducted free of charge and NSS did not
receive any compensation in return for Cisco’s inclusion.
This report provides detailed information about this product and its security effectiveness. Additional comparative
information is available at www.nsslabs.com.
As part of the initial AEP test setup, products were configured in a deployment mode typical to enterprises. As
such, products were configured to mimic an enterprise environment by applying typical applications such as
exclusion policies and tuning requirements. All product-based configurations are reviewed, validated, and
approved by NSS prior to the test. Every effort is made to ensure optimal security effectiveness, as would be the
aim of a typi
NSS Labs performed an independent test of the Trend Micro Deep Discovery Inspector Model 4000 (Hardware model 4100) v3.8 SP5 and OfficeScan (OSCE) v12.0.1807. The product was subjected to thorough testing at the NSS facility in Austin, Texas, based on the Breach Detection Systems (BDS) Test Methodology v4.0 available at www.nsslabs.com. This test was conducted free of charge and NSS did not receive any compensation in return for Trend Micro’s participation.
While the companion Comparative Reports on security, performance, and total cost of ownership (TCO) will provide information about all tested products, this Test Report provides detailed information not available elsewhere.
The production of counterfeit products is an increasing problem that affects the entire electrical industry. Counterfeit protective devices, like circuit breakers, including GFCI and AFCI for personal protection, pose one of the most significant risks to facility and employee safety.
Because counterfeit products are more difficult to detect than ever, we as an industry must do more to guard against their risks and liabilities. By purchasing products from authorized resellers and using available tools to authenticate products, buyers can ensure a safer supply chain that mitigates the risk sub-standard and counterfeit electrical safety devices pose.